Nolan Systems Inc. NHSTH4C2XXX Manuale Utente
To place the headset on your ear - Place the headset
speaker in your ear with the microphone angled towards your
mouth. The headset should fit snugly in your ear. However, if
the speaker is not fit your ear well, you can change to other
size of the ear cap that is provided with your headset.
speaker in your ear with the microphone angled towards your
mouth. The headset should fit snugly in your ear. However, if
the speaker is not fit your ear well, you can change to other
size of the ear cap that is provided with your headset.
SWITCHING ON YOUR HEADSET
To turn on the headset - With the headset turned off, press
and hold the Talk button for about 2 seconds. You will hear an
“ON” tone (four ascending “beeps”) and the LED will quick
flash 5 times. The headset turns on and is placed in standby
mode, ready to make and receive calls. After turn on the
headset, the headset will try to connect the last
paired/connected device automatically.
To turn off the headset - With the headset turned on, press
and hold the Talk button for about 5 seconds. You will hear an
“OFF” tone (four descending “beeps”) and after the LED will
quick flash 4 times, the headset is turned off. Release the Talk
button.
MAKING CALLS
You can make calls from your mobile phone, or directly from
headset using voice dialing and last number redialing (if it’s
supported by the phone)
To make calls from your mobile phone - Dial the call from
your mobile phone and the call is automatically connected to
your Headset.
To make calls using voice dialing (if supported by your
mobile phone) - With the headset in standby mode, press
(click) he Talk button on the Headset, and you will hear the
“VD” tone (Two short beeps). Speak the name of the person
you wish to call. The call is automatically connected to your
headset.
To make calls using last number redial (if supported by
your mobile phone) - Whilst in standby mode, press and hold
the Volume DOWN “-” or Volume UP “+” more than 2 seconds,
and you will hear a “LND” tone (four ascending “beeps”);
Release the Volume button, the call is automatically connected
to your mobile phone.
RECEIVING CALLS
You must configure your mobile phone to answer calls directly
on your Bluetooth headset. Refer to the mobile phone user
guide for instructions for initiating this feature.
When your mobile phone rings, press the Talk button on your
headset. The call is automatically connected to your headset.
Please note you can also Reject calls by depressing the talk
button for about 2 seconds. (Not all phones support this
feature)
ENDING CALLS
When you have finished your call, press the Talk button on
your headset. The call will be disconnected.
To turn on the headset - With the headset turned off, press
and hold the Talk button for about 2 seconds. You will hear an
“ON” tone (four ascending “beeps”) and the LED will quick
flash 5 times. The headset turns on and is placed in standby
mode, ready to make and receive calls. After turn on the
headset, the headset will try to connect the last
paired/connected device automatically.
To turn off the headset - With the headset turned on, press
and hold the Talk button for about 5 seconds. You will hear an
“OFF” tone (four descending “beeps”) and after the LED will
quick flash 4 times, the headset is turned off. Release the Talk
button.
MAKING CALLS
You can make calls from your mobile phone, or directly from
headset using voice dialing and last number redialing (if it’s
supported by the phone)
To make calls from your mobile phone - Dial the call from
your mobile phone and the call is automatically connected to
your Headset.
To make calls using voice dialing (if supported by your
mobile phone) - With the headset in standby mode, press
(click) he Talk button on the Headset, and you will hear the
“VD” tone (Two short beeps). Speak the name of the person
you wish to call. The call is automatically connected to your
headset.
To make calls using last number redial (if supported by
your mobile phone) - Whilst in standby mode, press and hold
the Volume DOWN “-” or Volume UP “+” more than 2 seconds,
and you will hear a “LND” tone (four ascending “beeps”);
Release the Volume button, the call is automatically connected
to your mobile phone.
RECEIVING CALLS
You must configure your mobile phone to answer calls directly
on your Bluetooth headset. Refer to the mobile phone user
guide for instructions for initiating this feature.
When your mobile phone rings, press the Talk button on your
headset. The call is automatically connected to your headset.
Please note you can also Reject calls by depressing the talk
button for about 2 seconds. (Not all phones support this
feature)
ENDING CALLS
When you have finished your call, press the Talk button on
your headset. The call will be disconnected.
TRANSFERRING CALLS
You can transfer calls connected to your headset back to your
mobile phone, or from your mobile phone to your headset. (Not
all phones support this feature)
mobile phone, or from your mobile phone to your headset. (Not
all phones support this feature)
To transfer calls from your headset to the phone just double
click the Talk button. The audio will be transferred
To transfer calls from the phone to your headset to just press
(click) the Talk button. The audio will be transferred
ADJUSTING THE VOLUME
click the Talk button. The audio will be transferred
To transfer calls from the phone to your headset to just press
(click) the Talk button. The audio will be transferred
ADJUSTING THE VOLUME
To increase the volume - While in talking mode, press (click)
the Volume UP “+” button to increase volume by 1 step, repeat
this procedure until you have reached the desired level. When
press and hold the volume up button, the volume will increase
step by step automatically.
To decrease the volume - While in talking mode, press (click)
the Volume DOWN “-” button to decrease volume by 1 step,
repeat this procedure until you have reached the desired level.
When press and hold the volume down button, the volume will
decrease step by step automatically.
MUTING THE HEADSET
You can mute and un-mute the microphone temporarily so that
you cannot be heard by the connected party.
To mute the headset - With talking mode, long press the Talk
button, and you will hear a MUTE tone (Two rising scales),
the microphone is muted.
To un-mute the headset
the Volume UP “+” button to increase volume by 1 step, repeat
this procedure until you have reached the desired level. When
press and hold the volume up button, the volume will increase
step by step automatically.
To decrease the volume - While in talking mode, press (click)
the Volume DOWN “-” button to decrease volume by 1 step,
repeat this procedure until you have reached the desired level.
When press and hold the volume down button, the volume will
decrease step by step automatically.
MUTING THE HEADSET
You can mute and un-mute the microphone temporarily so that
you cannot be heard by the connected party.
To mute the headset - With talking mode, long press the Talk
button, and you will hear a MUTE tone (Two rising scales),
the microphone is muted.
To un-mute the headset
-
When microphone is muted,
change Volume (Either Volume Up or Volume Down) will
un-mute the headset.
un-mute the headset.
VOICE DIAL
With the headset in standby mode, press (click) the Talk
button on the Headset, and you will hear the “VD” tone (Two
short beeps). Speak the name of the person you wish to call.
The call is automatically connected to your headset.
With the headset in standby mode, press (click) the Talk
button on the Headset, and you will hear the “VD” tone (Two
short beeps). Speak the name of the person you wish to call.
The call is automatically connected to your headset.
LAST NUMBER REDIAL
Whilst in standby mode, press and hold the Volume DOWN “-”
more than 3 seconds, and you will hear a “LND” tone (Single
long beep); Release the Volume DOWN “-” button, the call is
automatically connected to your mobile phone.
Whilst in standby mode, press and hold the Volume DOWN “-”
more than 3 seconds, and you will hear a “LND” tone (Single
long beep); Release the Volume DOWN “-” button, the call is
automatically connected to your mobile phone.
VISUAL INDICATION
Visual Indicators - 2 LEDs (blue and amber) indicate the status
of the headset:
of the headset:
Status Indication
Battery low
Amber LED on instead of Blue
LED
LED
Headset off
All LEDs are off
Headset in standby
mode, ready to make &
receive calls
mode, ready to make &
receive calls
Blue LED flashes at 3 second
intervals
intervals
Headset in pairing
mode
mode
Blue and Amber LEDs flash
alternately.
alternately.
TROUBLE SHOOTING
Please note that you should also be familiar with the operation
of your mobile phone and how to connect to Bluetooth devices.
Please read your mobile phone user guide carefully. Please
note that the Bluetooth headset will only work with Bluetooth
mobile phones. For operation with a PC or laptop device
please note that these devices should also be Bluetooth
enabled with appropriate third party software in order to enable
correct operation.
of your mobile phone and how to connect to Bluetooth devices.
Please read your mobile phone user guide carefully. Please
note that the Bluetooth headset will only work with Bluetooth
mobile phones. For operation with a PC or laptop device
please note that these devices should also be Bluetooth
enabled with appropriate third party software in order to enable
correct operation.
Symptom/Problem Solution
When Talk button is
pressed, no LED
indicator
pressed, no LED
indicator
• Unit not charged
• Consult authorized dealer
Headset powers on
with blue LED flashing
but no connection to
mobile phone
with blue LED flashing
but no connection to
mobile phone
• Check unit is paired to phone.
Check settings in phone.
Headset default name is BTHS
Headset default name is BTHS
• Check phone is switched on
• Check handsfree settings for
phone
• Ensure headset & phone are
within range
Headset does not
charge
• Check mains charger adapter
is connected to the headset
securely & is switched on
securely & is switched on
• Check mains charger is
working using another device
• Consult authorized dealer
CUSTOMER SERVICE INFORMATION
For other Nolan Bluetooth products or support, please view our
website – www.nolan-sys.com or email info@nolan-sys.com or
contact your local representative.
DISCLAIMER
Whilst every effort has been made to ensure that the
information in this manual is accurate and complete, no liability
will be accepted for any errors and/or omissions made. The
manufacturer reserves the right to make changes and
improvements to the specifications and features of the
hardware and firmware of the products described in this
document without prior notice. Reproduction, transfer,
distribution or storage of part or all of the contents in this
document in any form is prohibited without prior permission of
the manufacturer. All trademarks acknowledged.
information in this manual is accurate and complete, no liability
will be accepted for any errors and/or omissions made. The
manufacturer reserves the right to make changes and
improvements to the specifications and features of the
hardware and firmware of the products described in this
document without prior notice. Reproduction, transfer,
distribution or storage of part or all of the contents in this
document in any form is prohibited without prior permission of
the manufacturer. All trademarks acknowledged.