AgileMesh Inc. DNMA92AM Manuale Utente
1761 International Parkway, Suite 113 Richardson, TX 75081
O: 972-231-2122; F: 972-231-2406; www.agilemesh.com
Agilemesh RF Module Implementation Guide
Purpose: This guide is intended as an internal Agilemesh guidance document to
ensure that the radio module identified is installed in Agilemesh equipment in an
appropriate manner so as to comply with the conditions of the original FCC grant
and IC certificate.
Applicability: RF module FCC ID.: TTHDNMA92AM, IC:10127A-DNMA92AM
Antennas: The module was certified with the following antennas. These
antennas or antennas of the same design but lower gain may be used in the final
installation.
Band (GHz)
Gain dBi
Manufacturer’s
P/N
Manufacturer
2.4
7.4
SF-245SPR
NCG
4.9
5.3
SF-D49NSR
NCG
5.X
5.5
SF-D53NSR
NCG
Antenna connection: The final assembly must have non-standard antenna
connection such as a reverse gender connector.
Final assembly labeling: The final assembly must contain a label notifying the
user that the device contains a certified rf module that is identified by the
following product approval numbers:
FCC ID.: TTHDNMA92AM
IC: 10127A-DNMA92AM
An example of such a label is shown below.
connection such as a reverse gender connector.
Final assembly labeling: The final assembly must contain a label notifying the
user that the device contains a certified rf module that is identified by the
following product approval numbers:
FCC ID.: TTHDNMA92AM
IC: 10127A-DNMA92AM
An example of such a label is shown below.