Zebra P1031365-026 Manuale Utente

19

QLn Series User Guide

Ethernet and Charging Cradles

The cradle is an expansion base intended for use with the 

QLn320 printer, as well as the QLn220 printer. There is a 
four bay cradle (QLn-EC4) or a single bay option (QLn-EC) as 
shown on pages 19 and 20. 

It provides charging power to the docked printer as well as provid-

ing a standard 10/100Mb/S Ethernet port for communication to the 
printer.  The EC also supplies battery charging power to the docked 
printer and acts as a supplementary power source for a functioning 
QLn printer.  

The EC features two green LED’s to indicate the status of the 

cradle: Solid green to indicate when power         is provided to 
the input of the EC; and blinking green to indicate Ethernet ac-
tivity         . 

The cradle allows the user to dock the printer easily and remove 

it with the push of a button. The printer shall remain operable while 
docked, i.e. display is viewable, charge LED status is viewable, and 
printer controls and data entry are available.  The printer will still print 
while docked and the user shall be able to replace the media as well.

 

  Note • Remove the “Docking Cradle Access” label on the bottom of  

the printer before docking the printer in the cradle.

 

 

Note • Clean the docking contacts with the cleaning pen provided 

with the printer to remove any residue from the label.

LED Status

Indication

Solid Green

Power On

Blinking Green

Ethernet Activity

 

DOCKING CRADLE ACCESS