Hanyang Navicom Co. Ltd. RFCT-10 Manuale Utente
7
3.1.3 Local time setup
By default, system time is set to UTC, and the offset from UTC is set to 0.
To get the correct local time, appropriate local time offset needs to be set.
Move, first, to the screen “2.Time.”
2.Time, 2006,Oct-26,02:39:12, Thu
Local Offset: 0hr. 0min. DLS:ON
① Push “Enter” button.
2-1.Local Hour <Sing:* Backspace:#>
[Hour: 0] 9
② Type in local hour offset followed by pushing “Enter” button.
③ Push “Menu” button.
2-2.Local Min <Sing:* Backspace:#>
[Min: 0]
④ Type in local minute offset followed by pushing “Enter” button.
3.1.4 Daylight Saving Setup
Move, first, to the screen “2.Time.” followed by pushing “Enter” button.
Then, keep pushing the “Menu” button until you see “2-3.Daylight saving”
screen.
2-3.Daylight Saving <Dot:* Backspace:#>
[Start(m.d.h): 4.2.2]
① Type in start date of Daylight Saving followed by pushing “Enter”
button.
② Push “Menu” button.
2-4.Daylight Saving <Dot:* Backspace:#>
[End(m.d.h): 10.29.2]
③ Type in end date of Daylight Saving followed by pushing “Enter”
button.