AIR802 LLC AP25N01 Manuale Utente
AP25N01 User Manual
16
HARDWARE INSTALLATION
Physical Placement
The access point may be placed in a rack, above a ceiling, on a desk or shelf, or it may
be wall mounted. The bottom of the case includes rubber feet and slots for wall
mounting screws.
be wall mounted. The bottom of the case includes rubber feet and slots for wall
mounting screws.
Grounding
The 5.1 to 5.8 GHz radio has been designed with electro static discharge (ESD) circuitry
to protect the radio. In order for this to be effective, a ground cable must be secured
between the ground lug in the rear of the access point and a ground source to dissipate
any static electrical charge buildup. Ideally it should be grounded to electrical ground, a
cold water pipe (copper only), or a ground rod. A connection to building structural steel,
while not truly a proper ground would be better than no ground.
to protect the radio. In order for this to be effective, a ground cable must be secured
between the ground lug in the rear of the access point and a ground source to dissipate
any static electrical charge buildup. Ideally it should be grounded to electrical ground, a
cold water pipe (copper only), or a ground rod. A connection to building structural steel,
while not truly a proper ground would be better than no ground.
Wall mount slots
Feet
Ground lug