AIR802 LLC AP25N01 Manuale Utente
AP25N01 User Manual
41
Device Maintenance
The controls in this section are for the device maintenance routines: rebooting and
resetting.
resetting.
Reboot
Click Reboot to initiate full reboot cycle of the device. The effect of the software reboot
is the same as a hardware reboot or power off - power on cycle. The system
configuration is not modified after the reboot cycle completes however any non-applied
changes will be lost.
is the same as a hardware reboot or power off - power on cycle. The system
configuration is not modified after the reboot cycle completes however any non-applied
changes will be lost.
Reset to Defaults
Click Reset to Defaults to reset all device settings to the factory default. The running
system configuration will be deleted and the default system configuration will be set.
After the Reset to Defaults routine and Reboot process are completed, the device will
return to the default IP configuration (192.168.168.1/255.255.255.0) and will operate in
Station-Bridge mode.
system configuration will be deleted and the default system configuration will be set.
After the Reset to Defaults routine and Reboot process are completed, the device will
return to the default IP configuration (192.168.168.1/255.255.255.0) and will operate in
Station-Bridge mode.
NOTE: It is highly recommended to back up the system configuration before uploading
the new configuration.
the new configuration.