AIR802 LLC AP25N01 Manuale Utente

Pagina di 100
AP25N01 User Manual 
68 
Appendix IV- Services 
This section provides more details on the system management services. 
Ping WatchDog 
The ping watchdog sets the device to continuously ping a user defined IP address (the 
internet gateway for example). If it is unable to ping under the user defined constraints, 
the device will automatically reboot. This option creates a kind of "fail-proof" 
mechanism. 
Ping Watchdog is dedicated for continuous monitoring of the particular connection to 
remote host using the Ping tool. The Ping works by sending ICMP “echo request” 
packets to the target host and listening for ICMP “echo response” replies. If the defined 
number of replies is not received, the tool reboots the device. 
Enable Ping Watchdog 
Control will enable Ping Watchdog Tool. 
IP Address To Ping 
Enter the target host IP address to monitor. 
Ping Interval 
Specify the time interval (in seconds) between sending  the ICMP “echo requests”. 
Startup Delay 
Specify the initial time delay (in seconds) from device startup or reboot to starting 
sending ICMP “echo requests”. Minimum value is 60 seconds. 
Failure Count To Reboot 
Specify the number of ICMP “echo response” replies. If the specified number of ICMP 
“echo response” packets is not received continuously, the Ping Watchdog Tool will 
reboot the device. 
SNMP Agent 
Simple Network Monitor Protocol (SNMP) is used in network management systems to 
monitor network-attached devices for conditions that warrant administrative attention. 
The device contains an SNMP agent that allows it to communicate to SNMP 
management applications for network provisioning. 
SNMP Agent provides an interface for device monitoring using the Simple Network 
Management Protocol (an application layer protocol that facilitates the exchange of