Tivoli Audio NETWORKS Manuale Utente
9
Guide to Features (Rear panel):
DAB/FM ANTENNA: Extend and rotate the telescoping antenna for best reception. In strong
FM signal locations, reducing the antenna’s length usually provides better reception. Keep the
antenna retracted in its locked position when not being used to avoid damage.
WARNING: The DAB/FM antenna is not designed to be removed. Removal of this antenna
will void your warranty.
FM signal locations, reducing the antenna’s length usually provides better reception. Keep the
antenna retracted in its locked position when not being used to avoid damage.
WARNING: The DAB/FM antenna is not designed to be removed. Removal of this antenna
will void your warranty.
MONO/STEREO: Press in for Stereo only when the optional NetWorks Speaker is connected.
The display will show an “ST” for Stereo. In FM mode, when the optional NetWorks Speaker
is connected, placing the button in the Mono position during weak FM reception may help to
reduce noise. The display will show an “M” when the Mono/Stereo button is in the Mono po-
sition. Note it is possible for the source material (such as an internet station) to be broadcast
in mono even if the Stereo position is selected.
The display will show an “ST” for Stereo. In FM mode, when the optional NetWorks Speaker
is connected, placing the button in the Mono position during weak FM reception may help to
reduce noise. The display will show an “M” when the Mono/Stereo button is in the Mono po-
sition. Note it is possible for the source material (such as an internet station) to be broadcast
in mono even if the Stereo position is selected.
BALANCE: Leave this control in the “Left” position unless the optional NetWorksSpeaker is
connected. When the optional NetWorksSpeaker is connected, rotate the knob to the left or
right to adjust the sound from each speaker, or leave in the center detent position for equal
balance.
connected. When the optional NetWorksSpeaker is connected, rotate the knob to the left or
right to adjust the sound from each speaker, or leave in the center detent position for equal
balance.
HEADPHONE: Connect a set of headphones (not included) to this 3.5mm female mini stereo
variable output. The headphone volume is controlled by the wheel on the top of NetWorks+
and the volume buttons on the remote. Connected headphones will mute the main speaker.
Avoid listening to headphones at high volume levels to prevent hearing damage.
variable output. The headphone volume is controlled by the wheel on the top of NetWorks+
and the volume buttons on the remote. Connected headphones will mute the main speaker.
Avoid listening to headphones at high volume levels to prevent hearing damage.
USB: Connect a digital storage device (such as a memory stick) to this USB Type A .0 input,
or connect the female end of the included USB cable to this input and the male end to your
digital storage device. The display will briefly show “USB device found”. Set the source to
Music Player mode and select USB. The display will show “File Scan” as it scans the device
for media files. When connecting an iPod, be sure the iPod’s music is in MP3 format so the
or connect the female end of the included USB cable to this input and the male end to your
digital storage device. The display will briefly show “USB device found”. Set the source to
Music Player mode and select USB. The display will show “File Scan” as it scans the device
for media files. When connecting an iPod, be sure the iPod’s music is in MP3 format so the
1.
2.
3.
4.
5.
3
5
4
6