Accton Wireless Broadband Corp. FIU176205T01W Manuale Utente

  |  Installing the Gateway Router

Mounting on a Wall

–  34  –

The Wireless Broadband Router should be mounted only to a wall or wood 

surface that is at least 1/2-inch plywood or its equivalent. To mount the 

unit on a wall, always use its wall-mounting bracket. The unit must be 

mounted with the RJ-45 cable connector oriented upwards to ensure 

proper operation.

To mount on a wall, follow the instructions below.

Mark the position of the two screw holes on the wall. For concrete or 
brick walls, you will need to drill holes and insert wall plugs for the 

screws.

Insert the included screws into the holes, leaving about 0.08~0.12 
inches (2-3 mm) clearance from the wall.

Line up the two mounting points on the unit with the screws in the wall, 
then slide the unit down onto the screws until it is in a secured position.

Mounting Slots