Accton Wireless Broadband Corp. FIU176205T01W Manuale Utente

–  38  –

The Wireless Broadband Router offers a user-friendly web-based 

management interface for the configuration of all the unit’s features. Any 

PC directly attached to the unit can access the management interface using 

a web browser, such as Internet Explorer (version 6.0 or above).

If you are not sure of your connection method, please contact your 

Internet Service Provider. There are several connection types to choose 

from: Static IP, DHCP (cable connection), PPPoE (DSL connection), and 

PPTP. 

 If using the PPPoE option, you will need to remove or disable any 

PPPoE client software on your computers.

It is recommended to make initial configuration changes by connecting a 

PC directly to one of the Wireless Broadband Router’s LAN ports. The 

Wireless Broadband Router has a default IP address of 192.168.2.1 and a 

subnet mask of 255.255.255.0. You must set your PC IP address to be on 

the same subnet as the Gateway Router (that is, the PC and Gateway 

Router addresses must both start 192.168.2.x).

To access the Wireless Broadband Router’s management interface, follow 

these steps:

Use your web browser to connect to the management interface using 
the default IP address of 192.168.2.1.

Log into the interface by entering the default username “admin” and 
password “smcadmin,” then click Login.

 It is strongly recommended to change the default user name and 

password the first time you access the web interface. For information on 

changing user names and passwords, See