Nextar NS-BT007 Manuale Utente
Operation
Using By Connecting with Bluetooth AV Dongle
a. Press & hold the Speaker Pairing Button for 8 seconds until the LED flashes red & blue.
Red & Blue
LED flash
LED flash
b. Press & hold the Dongle Pairing Button for 8 seconds until the LED flashes red & blue.
Red & blue
LED flash
LED flash
c. Once the pairing mode is complete, both the Speaker & Dongle LED will flash blue.
Connect your bluetooth AV dongle with any music device with a 3.5 mm phone jack and
press play on your music device.
Connect your bluetooth AV dongle with any music device with a 3.5 mm phone jack and
press play on your music device.
Portable audio device, CD/MP3/DVD,
Computer, etc.
Computer, etc.
Remark:
Dongle & Speaker will exist in the pairing mode for 1 minute if pairing fails. To return the device to
pairing mode, turn off the device and restart steps a & b. The passcode of this speaker is fixed to “0000.”
It can not be paired with a bluetooth source device whose passcode is not “0000.”
Dongle & Speaker will exist in the pairing mode for 1 minute if pairing fails. To return the device to
pairing mode, turn off the device and restart steps a & b. The passcode of this speaker is fixed to “0000.”
It can not be paired with a bluetooth source device whose passcode is not “0000.”
7
Operation
Using By Connecting with Bluetooth Mobile phone
1. Press & Hold the Speaker Pairing Button for 8 seconds until the LED flashes red & blue.
Red & Blue
LED flash
LED flash
2. Turn on bluetooth mode of Mobile phone and enter "Search Bluetooth device" mode.
3. Mobile phone will find a device name "NS-BT007." Select this device. Input passcode "0000."
Bluetooth Device:
NS-BT007 Passcode:
NS-BT 0 0 7
00 00
Selection
Cancel
OK
Cancel
Remark: For other bluetooth source devices, passcode may be called”8888,” ”pass,” etc.
4. Mobile phone will ask "Authorize Auto Connect." Select YES.
Authorize Connect:
YES NO
5. After pairing is successful, the Speaker LED will flash blue.
8