Telson Information and Communications Co Ltd PA1060 Manuale Utente
Bellsouth feature list
- Scan Skip Function
When an active signal is detected, But communication is not desired, press the monitor
When an active signal is detected, But communication is not desired, press the monitor
button to bypass the channel and to continue scan.
Back Light On/Off
Press the Light Key shortly to light up the LCD display. The lamp will go out after (5)
seconds.
seconds.
Key lock On/Off
Press the Light Key long till the Key Lock symbol is on the LCD
Volume and Channel Change is disabled during Key Lock Mode.
Press the Light Key same manner again to release Key Lock Mode.
Volume and Channel Change is disabled during Key Lock Mode.
Press the Light Key same manner again to release Key Lock Mode.
Scan Function
The Scan activity is working in an endless channel loop from 1 to 14
Press Scan Key to activate channel scan
Press Scan Key to activate channel scan
1. check the detected channel by the 200msec
2. Scan Icon symbol is on the LCD.
3. Resume time keeps for 4 seconds
4. When an active signal is detected , Scan is paused keeping the active signal broadcasted.
2. Scan Icon symbol is on the LCD.
3. Resume time keeps for 4 seconds
4. When an active signal is detected , Scan is paused keeping the active signal broadcasted.
Operate PTT or external PTT . then Scan is stopped ant the active channel
Low battery Detect
When the battery level is low, the battery icon will flash to indicate that the batteries need to
be replaced
be replaced
Power Saving
The purpose of Power Saving is to maximize battery life.
Power Saving Start
!
After Power On (3) seconds elapse
!
After stop transmitting (3) seconds elapse
!
After stop receiving (3) seconds elapse
Power Saving releasing
!
Transmission
!
Receiving(Carrier Detect)
!
Monitor Operation
!
FM Mode
FM RADIO MODE