Cyber Acoustics CA-2885BT Manuale Utente

Your CA-2885BT speaker contains Bluetooth® technology, allowing you to wirelessly play music from 

nearly any Bluetooth enabled device. Now you can enter the room, select music to play on most 

smartphones, tablets, or laptops, and control your listening enjoyment from the comfort of your lap. 

From your device, you can easily control and change music tracks, playlists, adjust volume up or 

down, or even listen to podcasts, or many other audio applications available on your device.

Congratulations

Wireless speaker 

Carry pouch

Cables

Owner’s Guide with connection 

Box 

•  Read Instructions Carefully – All safety and operating instructions should be read before this device is operated.

•  Heat – Keep speakers out of extreme heat and away from extreme heat sources, such as, space heaters, radiators, stoves and other devices.

•  Water and Moisture – Keep speakers out of the rain and away from water. 

•  Cleaning – Use a dry cloth for cleaning. Do not wipe any part of the system with cleaning solvents, such as, furniture wax, bleach, benzene, or  ammonia.

Speaker connection

Caution

Please read the step by step instructions along with the diagrams provided.

•  Turn off the sample.

•  Plug in the included USB charging cable for charging (micro-USB plug to speaker and standard USB plug to USB power source).

•  LED will be white while the speaker is charging.

  

USB cable for charging

Connected

Not Connected

(not included)

Before you start, please fully charge up the speaker.

Ensure the Bluetooth capability of your source device is turned on and ready to discover new items. If needed, see your device’s instructions to add or setup a 

Bluetooth device.

Below steps are the guidelines for you to wirelessly connect with the Bluetooth function of your speaker:

1. Switch on the device and it will begin “Bluetooth pairing” mode – blue LED blinking.

2. With your audio source (smartphone, tablet, laptop, etc.), find the Bluetooth device list and look for “CA BT SPEAKER”. Select it to pair/connect with the speaker.

3.  When the device connects, you will hear a short audible sound, the LED will stop blinking and will turn to a solid “on” state.

4.  Now you can go to your music applications; start play and enjoy your music.

Turning off your source device will automatically disconnect your speaker and the speaker will go back to “Bluetooth pairing” mode automatically. If you plan on 

not using your speaker again for an hour or more, we recommend you turn off the speaker to save battery until you are ready to listen again.

• When the system is on, the speaker system has connected to any device. Press and hold the “ANSWER / END” button for three seconds until blue LED begins 

Once you’ve successfully paired your speaker, your device will automatically connect with it when returning to the room it is situated. You will be able to go the 

audio application of your choice, select your audio tracks to begin enjoying again. 

Receiving a call hands-free

If receiving a call on a mobile phone connected via Bluetooth, you can make a hands-free call through the speaker. Simply press “ANSWER/END” button to pick 

up the call, press again to end the call.

Note:

• When there is a phone call during audio playback using a Bluetooth connection, the speaker will play a ringtone simultaneously.

• Poor mobile phone reception will affect the conversation, make sure the mobile phone is in a place with good reception.

• An area near a wall may cause considerable voice echo. Move away from the wall or lower its volume to minimize this effect.

 

Playing Audio via AUX in jack*

1. Make sure the speaker is fully charged. 

2. Power on the device.

3. Plug in a 3.5mm AUX cable into AUX in jack.

4. Connect the other end of the AUX cable with your secondary audio source (often the headphone output jack). 

5. Music will play from the speaker system when you start the playback on the secondary audio source. 

* AUX input is prioritized (overrides Bluetooth audio source) whenever a 3.5mm cable is plugged in.

Power on

Pair with the speaker

Paired

Play music

Aux in connection

(disconnects Bluetooth)

blinking.  Search your device’s Bluetooth list for “CA BT SPEAKER” and tap to connect/pair.