La Crosse Technology TX231RW Manuale Utente

1. Loosen the screw on side of vane

2. Remove direction vane

3. Install new vane

4. Tighten screw

  Note: The directional vane attached to the stem on the sensor. 

           The screw will tighten to the flat side of the stem for a 

           secure fit.

1. Loosen the screw on side of cups

2. Remove cups

3. Install new cups

4. Tighten screw

  Note: The screw in the wind cups will fit on the flat side of the 

            metal stem on the sensor.

Page | 23         www.lacrossetechnology.com/support           328-2314