Neptune Technology Group Inc. BELTCLIPT3 Manuale Utente
5. Choose the device from the drop-down selection list and click Bluetooth.
The R900 BCT Status screen now displays the device details.
l
If you have previously paired a device, go to the R900 BCT Status screen and
not the AMR Connection screen.
not the AMR Connection screen.
l
If you want to Change Devices, you can click this option on the bottom of the
R900 BCT Status screen.
R900 BCT Status screen.
You then see the AMR Connection screen and can choose the device from the
drop-down selection list.
drop-down selection list.
Using the R900 BCT to Read a Route
To begin reading a route using the R900 BCT, you first need to load a route to the Nomad.
See “Loading and Unloading Data for Handhelds” in the N_SIGHT™ R900
See “Loading and Unloading Data for Handhelds” in the N_SIGHT™ R900
®
Online Help.
Click
to load a route when you are working in the
N_SIGHT R900 host software.Press F1 to see the instructions for
loading a route to a handheld.
loading a route to a handheld.
After the route is loaded and the pairing is complete, you can log in and the unit can
receive readings from the R900 BCT. For optimum RF performance, point the R900 BCT's
radio antenna towards the direction of the meter.
receive readings from the R900 BCT. For optimum RF performance, point the R900 BCT's
radio antenna towards the direction of the meter.
Neptune recommends meter readers place the belt clip for their
R900 BCT with the antenna end pointed forward. Human body and
other structures could impede radio transmission between MIUs
and the R900 BCT. By wearing the R900 BCT with the antenna side
pointed forward that interference is minimized.
R900 BCT with the antenna end pointed forward. Human body and
other structures could impede radio transmission between MIUs
and the R900 BCT. By wearing the R900 BCT with the antenna side
pointed forward that interference is minimized.
R900 Belt Clip Transceiver User's Manual
11
Setting Up the R900 Belt Clip Transceiver