HP X132 10G SFP+ LC SR J9150A Dépliant
Codici prodotto
J9150A
Services
Services
Services
Services
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
and response times in your area, please contact your local HP sales office.
HP ProCurve 10-GbE
HP ProCurve 10-GbE
HP ProCurve 10-GbE
HP ProCurve 10-GbE
SFP+ LRM Transceiver
SFP+ LRM Transceiver
SFP+ LRM Transceiver
SFP+ LRM Transceiver
SFP+ LRM Transceiver
(J9152A)
(J9152A)
A 10-Gigabit transceiver
in SFP+ form-factor that
supports the 10-Gigabit
LRM standard, for 10-
Gigabit connectivity up to
220 m on legacy
multimode fiber.
in SFP+ form-factor that
supports the 10-Gigabit
LRM standard, for 10-
Gigabit connectivity up to
220 m on legacy
multimode fiber.
Ports
Ports
Ports
Ports
1 LC 10-GbE port (IEEE 802.3aq Type 10Gbase-LRM); Duplex: full only
Physical characteristics
Physical characteristics
Physical characteristics
Physical characteristics
Dimensions
Dimensions
Dimensions
Dimensions
2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x
1.19 cm)
1.19 cm)
Environment
Environment
Environment
Environment
Operating temperature
Operating temperature
Operating temperature
Operating temperature
32ºF to 158ºF (0ºC to 70ºC)
Operating relative
Operating relative
Operating relative
Operating relative
humidity
humidity
humidity
humidity
humidity
0% to 85%, non-condensing
Non-operating/
Non-operating/
Non-operating/
Non-operating/
Storage temperature
Storage temperature
Storage temperature
Storage temperature
Storage temperature
–40ºF to 185ºF (–40ºC to 85ºC)
Cabling
Cabling
Cabling
Cabling
Type:
62.5/125 ìm or 50/125 ìm (core/cladding) diameter, graded-index, low
metal content, multimode fiber optic, complying with ITU-T G.651 and
ISO/IEC 793-2
Type A1b or A1a, respectively (a mode conditioning patch cord may be
needed in some multimode fiber installations);
Maximum distance:
62.5/125 ìm or 50/125 ìm (core/cladding) diameter, graded-index, low
metal content, multimode fiber optic, complying with ITU-T G.651 and
ISO/IEC 793-2
Type A1b or A1a, respectively (a mode conditioning patch cord may be
needed in some multimode fiber installations);
Maximum distance:
62.5 µm multimode cable @ 160/500 MHz*km = 0.5-220 m
62.5 µm multimode cable @ 200/500 MHz*km = 0.5-220 m
50 µm multimode cable @ 400/400 MHz*km = 0.5-100 m
50 µm multimode cable @ 500/500 MHz*km = 0.5-220 m
50 µm multimode cable @ 1500/500 MHz*km = 0.5-220 m
62.5 µm multimode cable @ 200/500 MHz*km = 0.5-220 m
50 µm multimode cable @ 400/400 MHz*km = 0.5-100 m
50 µm multimode cable @ 500/500 MHz*km = 0.5-220 m
50 µm multimode cable @ 1500/500 MHz*km = 0.5-220 m
Notes
Notes
Notes
Notes
1310 nm serial optics.
For OM3 cable (50 ìm multimode @ 1500/500 MHz*km), a mode-
conditioning patch cord is not required. Other multimode cables may
require
mode-conditioning patch cords to achieve the maximum distances listed
above.
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended.
For OM3 cable (50 ìm multimode @ 1500/500 MHz*km), a mode-
conditioning patch cord is not required. Other multimode cables may
require
mode-conditioning patch cords to achieve the maximum distances listed
above.
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended.
Services
Services
Services
Services
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
and response times in your area, please contact your local HP sales office.
© 2009 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth
in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth
in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Information is subject to change without notice
QuickSpecs
HP ProCurve SFP+ Transceivers (SR, LRM and LR)
HP ProCurve SFP+ Transceivers (SR, LRM and LR)
HP ProCurve SFP+ Transceivers (SR, LRM and LR)
HP ProCurve SFP+ Transceivers (SR, LRM and LR)
Technical Specifications
DA - 13285 Worldwide — Version 1 — March 17, 2009
Page 3