Contec DS110-APL Manuale Utente
Troubleshooting
FX-DS110-APL
52
When the APL Will Not Start
Check the power LED
・ Be sure the power LED is on. If it is not on, check the AC
・ Be sure the power LED is on. If it is not on, check the AC
adapter, be sure it is correctly plugged into an outlet, and that the
power supply type agrees with the power supply switch setting.
power supply type agrees with the power supply switch setting.
・ Check whether the power LED is flashing. If the power LED is
still flashing more than 10 minutes after the power is switched on,
the problem may be an APL firmware failure. Use the utility
software to upgrade the firmware version.
the problem may be an APL firmware failure. Use the utility
software to upgrade the firmware version.