Xeline Co. LTd. EU-200BX Manuale Utente
EU-200BX
Installation Manual
This document is subject to change without prior notice.
10
4. Installing the EU-200BX
4.1 Connecting the LAN and Console
Note: The EU-200BX should be located within the same broadcasting domain as the Stations
to be managed.
①
Connect the ISP backbone to the UPLINK port of the Switch Hub or PLC Master Unit.
②
Insert a RJ-45 direct cable into the LAN port of the EU-200BX and connect to the LAN
port of the Switch Hub.
[Note] When connecting directly to the PLC Master Unit, insert the RJ-45 cable into
an available RJ-45 port of the PLC Master Unit.
③
Insert the RJ-45 / RS-232 cable into the CONSOLE port of the EU-200BX. Connect the
other end of the cable to the SERIAL port of the PC.
④
Connect the power adaptor to the EU-200BX and plug into the power outlet.
Figure 5 Connecting the LAN and Console
EU-200BXB