Xeline Co. LTd. EU-200BX Manuale Utente
EU-200BX
Installation Manual
This document is subject to change without prior notice.
15
4.3 Setting the IP of the EU-200BX
①
Use the following id and password to log into the EU-200BX.
Login ID: root
Password: xeline (optional)
Figure 13 EU-200BX Login
②
Type <vi /mtd/etc/start>.
③
When the following screen appears, type<i> to change to the INSERT mode.
④
Modify the IP address in “ifconfig eth0” and “route add default gw”.
[Important Note] Always use a fixed IP address. DHCP is not supported!
Figure 14 IP Configuration Example
[Note 1] To delete a typo in the IP address, you must FIRST EXIT the insert mode.
This can be done by using the <ESC> key. Then point the cursor to the letter to
delete and press the <x> key. One letter will be deleted at a time. To reenter the IP
address, type <i> to return to the insert mode.
[Note 2] If the cursor does not move using the direction keys, check if the
emulation setting is set to VT100. If the emulation is NOT SET to VT100, the cursor
may not move.