Xeline Co. LTd. EU-200BX Manuale Utente

 

19

The POWER LED does 

not activate. 

Check if the power cable is firmly plugged into the EU-200BX and 

power outlet. 

No information is 

displayed during 

console connection. 

① 

Check if the RJ-45 / RS-232 cable is firmly plugged into the 

EU-200BX and PC.     

② 

Check if the selected serial port of the Hyper Terminal 

matches the actual serial port. 

③ 

Check if the configured information such as baud rates, data 

bits, parity, etc. is correct. 

IP address of the EU-

200BX is not 

configured. 

Check for typos when configuring the IP address. 

Connection is not 

possible to the SEMS 

Software. (Ping is also 

not possible.) 

① 

Connect to the EU-200BX through the console port. 

② 

Check the IP address of the EU-200BX. 

③ 

If the IP address is incorrect, set the appropriate IP address 

to the EU-200BX. Refer to 4.3 Setting the IP of the EU-200BX 

for details. 

④ 

If the IP address is correct, check the RJ-45 cable connected 

to the EU-200BX. 

⑤ 

Perform ping tests from the EU-200BX to the SEMS Software 

installed PC. 

⑥ 

Connect to the EU-200BX using the SEMS Software. 

⑦ 

Go to the EU-200BX main screen and download the previous 

EU information. Refer to the SEMS Software User Guide 3.5.1 

EU-200BX EMS Unit.   

If the problem is still not solved, please contact Xeline’s Technical Support Center.