Xeline Co. LTd. MM-202BX Manuale Utente

Pagina di 14
                                
MM-202BX 
Installation Manual
 
This document is subject to change without prior notice.
 
 
2.3 Guidelines for Installation 
Please make sure to read the following guidelines before installation. 
 
(1)  Install the MM-202BX on the inner side of power-supplied distribution panel of a 
building. In case there is not enough space to install inside, install it on the 
external wall of the distribution panel. 
(2)  When installing on the external wall of the distribution panel, prepare a 
protective enclosure to protect the device and to prevent effects from external 
environment.   
(3)  Never install  MM-202BX on a wall made of materials such as aged and rusted 
wood, etc. 
(4)  Use silicon compound to fix firmly when it is difficult to use only clamp screws 
when fixing the MM-202BX on the inner wall of the distribution panel. 
(5)  Avoid the following environments: 
Areas with extremely high or low temperatures 
Areas with high humidity or high risk of flooding 
Areas where sudden changes in temperature occur 
Under direct sunlight   
(In outdoor configurations, install the MM-202BX in a shady area away from 
direct sunlight.) 
(6)  Install the MM-202BX at least 1m from the ground to avoid contact with children 
or small animals. 
 
 
2.4 Safety Precautions 
Please make sure to read the following instructions before handling the equipment. 
 
(1)  Read all instructions before installing or operating the equipment. Be sure to 
keep this manual for further reference. 
(2)  Please follow all the safety precautions and other installation procedures. 
(3)  Do not place heavy objects on top of the MM-202BX. 
(4)  If water or any other liquid is spilled on the device, turn off the power and 
unplug the cord. Contact your Internet Service Provider or Xeline’s Technical 
Support Center. Continuing to use the device may cause fire or an electric shock. 
(5)  Do not open, disassemble, or attempt to repair the device. If service or repair is 
required, contact your service provider or Xeline’s Technical Support Center. 
Incorrect reassembly can cause electric shock when the equipment is 
subsequently used.