Silex Technology 2933-UW Manuale Utente
User’s
Guide
Document #40171-120 Rev. AX1
7
Hardware Setup
(wired and wireless versions)
1. Before attempting to install the TROY PocketPro USB print server,
make sure you have installed and set up your printer as described in
the documentation that came with the printer.
the documentation that came with the printer.
2. Write down the 12-digit MAC address printed on the label located on
the bottom of the print server (for example: 004017023F96). You
may need this number in order to configure the print server.
may need this number in order to configure the print server.
3. Mount the print server on either the printer or the desktop:
Printer mount – attach the print server to a suitable location on
the side or rear of your printer by applying an adhesive Velcro
strip (provided in the printer mounting kit) to your printer and at
the top of the print server as it is to be attached to your printer.
strip (provided in the printer mounting kit) to your printer and at
the top of the print server as it is to be attached to your printer.
NOTE: Be sure to review the hardware requirements in the previous
section to ensure you have the necessary information before installing
the print server.
section to ensure you have the necessary information before installing
the print server.