Silex Technology 2933-UW Manuale Utente

 

TROY Group, Inc. 

 

12 

1.  Ensure your PC is connected and has access to your network. 

2.  Connect an available Ethernet cable from your network hub to the 

PocketPro USB print server.  Ensure the print server is powered on. 

3.  With your printer and print server switched on and ready, press the 

test button on the print server to print a test page.  The test page will 
display the current IP address assigned to the print server by your 
network DHCP service.  If your network does not use DHCP, then 
the print server will have the default IP address of 192.0.0.192.  In 
any case, your computer must use an IP address other than the one 
used by the print server in order to establish a connection between 
the two devices. 

4.  Configure the 802.11b wireless settings (only for the PocketPro USB 

Wireless version).  To operate on an 802.11b network, you must set 
the wireless mode (ad-hoc or infrastructure), SSID channel, data rate, 
and WEP encryption of the PocketPro USB Wireless print server to 
the same configuration as the wireless network you want the print 
server to communicate on.  All nodes of a wireless network need to 
have the same settings in order to communicate with each other. 

5.  From the host computer, open a standard web browser (e.g., 

Microsoft Internet Explorer or Netscape Navigator), enter the IP 
address of the print server into the address bar of the web browser, 
and then press Enter.  The WebXAdmin Utility will be displayed, 
allowing you to configure the settings of the print server.  Refer to 
the PocketPro USB Administrator’s Guide (provided in PDF format 
on the TROY PocketPro USB Installation CD) for detailed 
information on using the WebXAdmin Utility.