Manualsbrain.com
  1. Manuali
  2. Marche
  3. Silex Technology
  4. TROY200
  5. Manuale Utente

Silex Technology TROY200 Manuale Utente

Scarica
Pagina di 83
 
Page 5 
Chapter 2
 
LAN Installation 
This chapter describes how to install the WPS-0104 LevelOne Wireless Printer Server 
in your Local Area Network. 
2
 
Procedure 
1. Preparation 
• 
Ensure the power is OFF. Do not connect the WPS-0104 LevelOne Wireless Printer 
Server while power is On. 
• 
Find the Default Server Name for your WPS-0104 LevelOne Wireless Printer Server. The 
Default Server Name is shown on a sticker on the base of the device. It consists of 8 letters 
and/or digits. Record this name; it may be needed during configuration. 
2. Connect the Printer or Printers 
Connect the printer or plotter cable(s) to the appropriate port(s) on the WPS-0104 LevelOne 
Wireless Printer Server unit.  
3. Connect to your Network 
Wired Network Interface 
Connect the network cable to the 10/100BaseT LAN connector on the WPS-0104 LevelOne 
Wireless Printer Server. 
 
 
• 
To use the LAN interface, the LAN cable needs to be inserted 
BEFORE powering ON
 
• 
In the default Wireless "Infrastructure" mode, connecting a LAN cable 
will disable the Wireless interface. To use both the LAN and Wireless 
interfaces, the Wireless mode must be changed to "Ad-hoc". 
 
Wireless Network Interface 
Ensure that your Access Point is compatible with the WPS-0104 LevelOne Wireless Printer 
Server's default settings: 
SSID 
Null (blank) 
The WPS-0104 LevelOne Wireless Printer Server will adopt the SSID used by 
the Access Point, unless the Access Point is configured not to broadcast its 
SSID. 
WEP 
Disabled. 
 
 
Because the default Wireless mode is "Infrastructure", you cannot 
configure the WPS-0104 LevelOne Wireless Printer Server via the 
Wireless interface unless you have an Access Point.