Wistron Corporation BU7LTN Manuale Utente
Getting Started
1.
WiFi starts connecting after system boot or WiFi module power on by clicking
Turn wireless radios on
Turn wireless radios on
on the Network Manager dialog.
2.
When WiFi is enabled, Network connection menu shows SSID list. It will scan the
current signal to get a list of AP. Only the AP that T-note supports will be shown.
If the number of the AP is more than 4, the arrow will appear. You can click
arrow to check more AP. If a new AP scanned, it will notify you to connect it
manually.
current signal to get a list of AP. Only the AP that T-note supports will be shown.
If the number of the AP is more than 4, the arrow will appear. You can click
arrow to check more AP. If a new AP scanned, it will notify you to connect it
manually.
3.
If a scanned AP matches an existing profile, Network Manager will connect AP
according to the priority.
according to the priority.
4.
When clicking the AP that has password, it will pop up a box to input the
password at the first time. When you completed the password input and clicked
OK, the password box will automatically disappear. If you input a wrong
password, it will pop up a box to notify you. You can retry to input.
password at the first time. When you completed the password input and clicked
OK, the password box will automatically disappear. If you input a wrong
password, it will pop up a box to notify you. You can retry to input.
5.
When failing to connect to a WiFi AP, then try to connect another lower priority
AP and notify you at the same time.
AP and notify you at the same time.
Prohibited WiFi Network Connection
1.
Right click the Network Manager indicator on the top-bar.
2.
Click Turn wireless radios off.
Note:
For more information about the WiFi network, see the Help for the network.
28
Apollo User Guide