Wistron Corporation IPNTYS05N Manuale Utente

mounting screws, and then tighten the top screws. See 

.

Method B: Attach the 15-cm (6-inch) CAT5e cable, position the stand 
over the mounting rivets, and slide the phone down the wall so that 
the rivets fit into the slots on the stand, indicated in 

 (Method B).

9.

Replace the stand cover. Ensure that all cables are neatly routed and 
press the stand cover into place until you hear a click.

10. Put the phone in the wall-mount position (optional). If you wall-

mounted your phone, put it in the wall-mount position by holding the 
Tilt Lever and pressing the phone towards the base until the phone is 
parallel with the base. Release the Tilt Lever and continue to push the 
phone towards the base until you hear an audible click. Ensure the 
phone is securely locked in position.

In order to take advantage of wideband audio, you must replace the 
handset supplied with the deskphone with a wideband handset. 

1.

Obtain a wideband handset.

2.

Unplug the handset supplied with the deskphone, leaving the handset 
cord attached to the phone.

3.

Connect the handset cord to the wideband handset.

In order to take advantage of wideband audio, you must replace the 
handset supplied with the deskphone with a wideband handset. 

1.

Obtain a wideband headset.

2.

Unplug the handset supplied with the deskphone, leaving the headset 
cord attached to the phone.

3.

Connect the headset cord to the wideband headset.