Wistron Corporation IPNTYS05N Manuale Utente

Bluetooth

headset since this choice has been moved to the 

Headset menu.

•

Users of USB Audio on an Avaya 1120E IP Deskphone or Avaya 
1140E IP Deskphone when connected to a BCM system may 
experience constant beeping from the wireless headsets if the user 
inadvertently hits a call control keys in error.

•

For the Avaya USB Adapters it is a requirement that the firmware of 
this device be V2.0.32 or later.

•

For the Algo 4900 USB ATA it is a requirement that the firmware of 
this device be v1.00.32 or later.

•

The Algo 4900 USB ATA is classified as a high power USB device 
and must be connected to the phone through a powered USB hub.

•

The Plantronics CS50-USB and CS60-USB must be AC powered 
prior to connecting them to phone.

•

For the Plantronics CS50-USB and CS60-USB please make sure the 
headset base is in ready mode (i.e. the green LED on the right hand 
side of the headset cradle is solid) before using the headset.

•

For the Plantronics CS50-USB and CS60-USB the On Hook/Off Hook 
button must be depressed for 3 seconds to go off hook.

•

At the time of this writing, GN Netcom produces four models of the 
Jabra GN9300 series headsets: Jabra GN9330, Jabra GN 9330E, 
Jabra GN 9350 and Jabra GN9350E. 

The USB Audio feature in 

the IP Deskphones only supports the Jabra GN9330E and 
Jabra GN9350E connected via USB.

•

For the GN Netcom 9300 series occasionally a single ring is lost 
between the phone and the headset but is recovered at the next ring.

•

For the GN Netcom 9300 series occasionally a drop in audio quality 
may be experienced when a 3-way conference is established.

You can use the Avaya Mobile Headset Adapter to answer calls 
whenever the Avaya 1140E IP Deskphone is running.

To access the Avaya Mobile Headset Adapter (MHA) properties, press 
the 

Services

 key twice to open the Local Tools menu, press the 1 key on