RadioFrame Networks Inc MCSERIESHP10 Manuale Utente

MC-Series High-Power System 

 

System Definition 

998--01 Rev X1 

RadioFrame Networks, Inc. 

CONFIDENTIAL AND PROPRIETARY 35 

 

 

Table 14  Transmit and Receive Frequencies 

806.0125 to 823.9875 

851.0125 to 868.9875 

896.01875 to 900.98125 

935.01875 to 939.98125 

Table 15  Transmitter Performance Summary 

Tx Output Power Level (Note 2)  

OMC Datafill: 
DefaultTxPower  = 9.5 

+27 +29 +31 dBm 

Tx Output Power Control Range 

 

+18 -- +29 

dBm 

Transmit port VSWR 

Referenced to a 50 Ω 
impedance 

--  -- 2:1 -- 

Downlink Signal Quality Estimator 
(SQE) 

Average value 

--  

30 

-- 

dB 

Occupied bandwidth  

Per carrier 

-- 18.5 --  kHz 

RF Frequency Tolerance (Tx) 

Average frequency 

-- -- 

± 

50 

Hz 

Note 1: Unless otherwise stated, all values are referenced to the top of the rack. 

Note 2: At maximum rated RF output power, all spurious and harmonic emissions should 
be at the noise floor. No combination of IM products or any other spurious emissions 
generated in the transmitting equipment should exceed the underlying noise floor in the 
operating band. Also, the Tx output power level is a function of the datafill parameters. 
The nominal maximum Tx power at the top of the rack with a maximum variation of ± 2 dB 
is +29 dBm.  

The transmit power out at the top of the rack (TOR) is dependent on the iSC datafill. 
Table 16 displays defaultTxPower vs. TOR output Power. The dynamic range is 11 dB, 
but the output power has been shifted up considerably from the low-power MC-Series 
system.