Honeywell International Inc. WFSLCDUI Manuale Utente
10
PRELIMINARY: Firelite Wireless Sensor Network — P/N LS10036-000FL-E:N0 10/09/2013
About This Guide
Purpose
Section 1: About This Guide
1.1 Purpose
The Firelite Wireless Sensor Network user’s manual provides an overview of the following:
•
Wireless fire alarm system
•
Instructions for installing and configuring the wireless devices
•
Information on monitoring the status of the wireless devices
•
Removal and replacement procedures of the W-GATE and W-DIS-D
•
Testing, maintenance and firmware upgrade information of the W-GATE and W-DIS-D.
1.2 Assumed Knowledge
The document is created with the assumption that all users are familiar with working on a PC and
laptop for configuration purposes. Installers should be familiar with the Fire Alarm and Related
Service Standards.
laptop for configuration purposes. Installers should be familiar with the Fire Alarm and Related
Service Standards.
The terminology and level of details of this document reflect this assumption.
1.2.1 Additional References
1.3 Site Survey
A site survey is recommended to assess and qualify the site prior to installing the Wireless Fire
Alarm system. The site survey utility allows you to perform the Link quality test and radio fre-
quency (RF) assessment of the site. This information is used for site qualification, maximum device
spacing identification, and configuring the network. This helps to optimize the reliability and per-
formance of the wireless network in the wireless fire alarm system. Conduct a site survey, and
ensure there are no obstructions for using RF communications. For more information on a site sur-
vey, refer to Appendix A:, "Site Survey".
Alarm system. The site survey utility allows you to perform the Link quality test and radio fre-
quency (RF) assessment of the site. This information is used for site qualification, maximum device
spacing identification, and configuring the network. This helps to optimize the reliability and per-
formance of the wireless network in the wireless fire alarm system. Conduct a site survey, and
ensure there are no obstructions for using RF communications. For more information on a site sur-
vey, refer to Appendix A:, "Site Survey".
Model
Description
Manual
W-SD355
Wireless LiteSpeed
Detector, Photo
Detector, Photo
W-SD355 and W-SD355T Intelligent Wireless
Photoelectric Smoke Sensors.
Manual part number for the above devices- I56-
4081-000
Photoelectric Smoke Sensors.
Manual part number for the above devices- I56-
4081-000
W-SD355T
Wireless LiteSpeed
Detector, Photo/Heat
Detector, Photo/Heat
W-H355R
Wireless LiteSpeed Heat
sensorHeat, Rate Of Rise
135
sensorHeat, Rate Of Rise
135
W-H355R and W-H355 and Intelligent Wireless
Temperature Sensors.
Manual part number for the above devices- I56-
4082-000
Temperature Sensors.
Manual part number for the above devices- I56-
4082-000
W-H355
Wireless LiteSpeed Heat
sensor Heat, Fixed
Temp135
sensor Heat, Fixed
Temp135
W-MMF
Monitor Module
W-MMF Wireless Monitor Module. Manual Part
number - I56-4083-000
number - I56-4083-000