Honeywell International Inc. WFSLCDUI Manuale Utente

PRELIMINARY: Firelite Wireless Sensor Network P/N LS10036-000FL-E:N0 10/10/2013  

61

Devices

The following are the specifications for the devices.

The below table provides details on the device references.

For information on installing the devices, refer to the manuals mentioned in the above table.

For information on mounting and wiring, refer to the manuals mentioned in the table 4.2.

The configuration of a device starts with assigning a profile.  Refer to the instructions below for 
assigning a profile. 

•

Assiging profiles using PC Tools.

•

Assigning profile to a detector with a W-GATE or distributor.

•

Assigning profile to a module with a W-GATE or distributor.

Radio Frequency

Lower ISM Band (915 MHz)

Maximum power output

+17dBm

Minimum signal strength level needed at the receiver for a primary path 
with weak link trouble reporting enabled.

-50dBm

Minimum signal strength level needed at the receiver for a secondary 
path or primary path with weak link trouble reporting disabled.

Must be 15 dBm higher than 
the noise floor down to -
87dBm

Maximum ambient noise level

-90dBm

Minimum battery life

1 year

W-SD355

Wireless LiteSpeed Detector, Photo

W-SD355 and W-SD355T Intelligent 
Wireless Photoelectric Smoke Sensors.
Manual part number for the above 
devices- I56-4081-000

W-SD355T

Wireless LiteSpeed Detector, 
Photo/Heat

W-H355R

Wireless LiteSpeed Heat 
sensorHeat, Rate Of Rise 135 

W-H355R and W-H355 and Intelligent 
Wireless Temperature Sensors.
Manual part number for the above 
devices- I56-4082-000 

W-H355

Wireless LiteSpeed Heat sensor 
Heat, Fixed Temp135

W-MMF

Monitor Module

W-MMF Wireless Monitor Module
Manual part number - I56-4083-000