drakesystem co. ltd DSCAR002 Manuale Utente

These functions can be activated or de-activated by remote controller. 

All of these functions can be programmed when the key is located on “ACC” state   

in the key box.   

All of them are toggle functions and the default setting is “ON”.  

When these functions are activated, you can hear “BEEP_HI_LO” once. 

When these are de-activated, you can hear “BEEP_HI_ LO” twice. 

 

2-8.  CHIRP / NO CHIRP 

          When the button “LOCK” is pressed twice shortly (double click) during 

      the car key is in “ACC” position in the key box, the CHIRP sound 

      will be activated or de-activated with the green LED and “BEEP_HI_LO”.   

The siren in the mode of alarm and panic cannot be removed even though  

the “CHIRP” is de-activated. 

 

2-9.  ADJUSTMENT OF LOCK TIME 

     When the button “ UNLOCK” is pressed twice shortly, this function can be changed. 

The default is 3 seconds and the other is 0.8 seconds. 

     As this function is set properly at the time of installation, you need not use this 

function. 

 

2-10. IGNITION LOCK 

When the button “ASTERISK” is pressed twice shortly, this function can be changed. 

The car locks the door automatically during driving when it is activated, 

  but unlocks the door during driving when it is de-activated. 

 

2-11.  ON / OFF OF SENSOR 

When you press the button “AUX” twice shortly, you can toggle this function. 

When the sensor is activated, the car can be triggered by the sensor and alarms 

the triggering of shock at the arm mode. But the car ignores the triggering 

of sensor when de-activated.   

 

 

 

2-12. PAGING FROM CAR 

The paging from the car to the remote controller is unique feature  

of the 2-way car alarm system.   

The user can recognize the intruding into the car even though he/she is   

far away from it.     

When the car is in arm state and triggered by shock sensor or door open, 

            it alerts the status with light flashing and siren. And then, 

        it sends the signal to the remote controller to alert this status to the user.   

Now the user can recognize the triggering by the remote controller shows   

15 times of green, red LED and “CRICKET” sound. The siren and light can be