Wilson Electronics LLC 2B4310SM Manuale Utente

Before Getting Started
This guide will help you properly install Wilson’s dual-band, SignalBooST™ amplifier.  

application prior to installing any equipment.  Read through the instructions, visualize 

where all the equipment will need to be installed and do a soft installation before mounting 

any equipment. if you do not understand the instructions in full, please contact Wilson 

Technical Support at 866-294-1660

installation overview
The following steps provide a summary of the amplifier/antenna installation process using 

a magnet-mount or mini magnet-mount antenna. However, they are not a substitute for the 

complete installation instructions on the following pages, which you should read thoroughly.  

If you are using a different antenna, follow the specific instructions that come with it.

StEP 1 install the antenna
For a vehicle installation, attach the antenna in the center of the vehicle’s roof and run the 

cable through the door to the amplifier. For a home or office installation, attach the magnet-

mount or mini magnet-mount antenna to the optional window bracket, affix the bracket to 

a window with the suction cups and run the cable to the amplifier. (See pages 4 and 6 for 

details and warnings.)

STEP 2 Install the Amplifier
Position the amplifier in a well-ventilated location away from direct sunlight. Run the cable 

from the antenna and attach it to the FME-Male connector labeled “outside antenna” on the 

amplifier. (See pages 5 and 6 for details.)

StEP 3 attach the Universal Connector or the Cradle antenna
attach the universal connector cable to the FME-Male connector labeled “Universal 

Connector” on the amplifier. Attach the other end of the cable to your cellular data card with 

the supplied VElCRo

®

. (See page 7 for details.)  Or, attach the Cradle Antenna cable to 

the amplifier.

STEP 4 Power up the Amplifier
iMPoRTanT! Before connecting the power supply, ensure that both the antenna cable and 

the cable to either the Cradle antenna or the Universal Connector are connected. (See 

page 8 for details.)

(Part #859940)