Wilson Electronics LLC 8140SD Manuale Utente
4. AMPLIFIER INSTALLATION (see illustration on pg.4)
4.1 Installing the
Wilson Cellular
Antenna
4.1.1 See antenna packaging for model specific instructions.
4.1...See Warnings (Section 7)
4. Installing The Amplifier
4..1 Select a suitable location to mount the AMPLIFIER. The amplifier can
be mounted to the selected location using screws. (Screws not included.)
Mount the AMPLIFIER away from direct sunlight, excessive heat and/
or moisture. The amplifier needs proper ventilation.
4.. Connect the outside antenna to the AMPLIFIER side labeled “OUTSIDE
ANTENNA”.
4.. Connect the ADAPTER EXTENSION CABLE to the AMPLIFIER side
labeled “CELLULAR PHONE”.
4..4 An external antenna adapter is required (sold separately) to connect the
AMPLIFIER to the cellphone. External antenna adapters connect di-
rectly to the antenna extension cable.
4..5 Connect the DC power supply to the AMPLIFIER. Verify that both the
OUTSIDE ANTENNA and the ADAPTER EXTENSION CABLE
are connected before powering up the AMPLIFIER.
NOTE: Visit our website at
www.wilsonelectronics.com
for the latest adapter
cross reference chart. If your phone’s adapter is not available from
your retailer contact us at 1-866-94-6996 and we will help you
locate one in your area. For further assistance contact our technical
support Toll-Free at 1-866-94-1660.
NOTE:
iDEN
Antennas
are recommended for
iDEN Amplifier 814004
.