BenQ Mobile GmbH & Co. OHG S56 Manuale Utente

S56 am, A31008-H5700-A40-1-7619  (6. December 2002, 13:46)

© 

Siem

ens AG 2002

, D

:\P

oo

l\L

55\S55\

am\Kurzanle

itung\S5

6K_Startup.fm

The battery is not fully charged 

when delivered. Plug in the charger 

cable at the bottom of the phone, 

plug in the power supply unit to the 

power socket and charge for at least 

two hours. 

h

During charging.

Charging time
An empty battery is fully charged 

after about 2 hours. Charging is only 

possible in an ambient temperature 

of 41 °F to 104 °F (the charge icon 

flashes as a warning when the tem-

perature is 41 °F above/below this 

range). The voltage specified on the 

power supply unit must not be ex-

ceeded.
To obtain maximum performance 

from the battery, it must be fully 

charged and then emptied at least 

five times.

Charge icon not visible
If the battery is totally discharged, 

no charge icon is displayed when 

the charger is plugged in. It will 

appear after two hours at most. In 

this case the battery is fully charged 

after 3-4 hours.
Only use the charger provided!
Display while in service
Charge level display during 

operation (empty-full):

a d g

A beep sounds when the battery 

is nearly empty. The battery level is 

only shown correctly during an un-

broken charging/discharging cycle. 

You should therefore not remove the 

 and where possi-

ble not finish the loading process early.

Performance 
A full battery will deliver between 

60 to 300 hours of standby time or 

100 to 360 minutes of talktime.

Note
The charger heats up when used for long 

periods. This is normal and not dangerous.

Note 
Your phone's display is delivered with a protective film. 
Remove this film before getting started.
In rare cases the static discharge may cause discoloration at the edges of the display. 

However, this will disappear within 10 minutes.