Comba Telecom Ltd. RX4122-B Manuale Utente
INSTALLATION GUIDE FOR RX-4122
ENU STATUS : 1-0-1
Copyright - refer to title page
Page 17
3.3.4 WALL MOUNTING
Drill four holes on the wall using the position of four holes on the mounting rack as a guide. Fix the
mounting rack to the wall using four masonry bolts (M10x110mm).
Install the Mounting Rack to the wall.
Hang the equipment and secure the enclosure to the mounting rack.
Mounting Rack
Expansion Bolt
M10X110
M10X110
Chassis
M8X25,Hexagon
Head,
Flat Gasket,Pad
Head,
Flat Gasket,Pad
Pylons Screw
Wall
Figure 5: PS BDA Wall Mounting
3.3.5 DRIP-LOOP
Comba recommends that every horizontal cable entry to the equipment forms a 'U' before its entry to the
equipment. Water on the cable will drip down at the bottom of the loop and will not accumulate at the equipment
connectors.
equipment. Water on the cable will drip down at the bottom of the loop and will not accumulate at the equipment
connectors.