Sony Ericsson Mobile Communications Inc. TR-505-A2 Manuale Utente
DM15/25 Integrator’s Manual
4 OF 38
1
Introduction to the Integrator’s Manual
1.1
Overview
This manual is for use as a guide to the setup, installation, and use of the DM-15/25 module into your application. The module may be tested
using the Developer’s Kit which is supplied together with the a DM-15/25 module and all the necessary tools.
The DM-15/25 module is intended for mounting into an application developer’s chassis to provide wireless communication capability for the
product. The target chassis could be in a wide variety of forms such as a residential electric meter, a point of sale terminal, an alarm panel, or
an automobile console. All initial configuration, mode control, and operational commands are issued to the module over an RS-232 serial port
using a flexible AT command format. The module circuitry has been designed to meet the environmental requirements of a large range of
commercial and industrial users.
using the Developer’s Kit which is supplied together with the a DM-15/25 module and all the necessary tools.
The DM-15/25 module is intended for mounting into an application developer’s chassis to provide wireless communication capability for the
product. The target chassis could be in a wide variety of forms such as a residential electric meter, a point of sale terminal, an alarm panel, or
an automobile console. All initial configuration, mode control, and operational commands are issued to the module over an RS-232 serial port
using a flexible AT command format. The module circuitry has been designed to meet the environmental requirements of a large range of
commercial and industrial users.
1.2
How to read the manual
This manual is divided into four chapters. Chapter 2 is Safety & FCC Requirements. Chapter 3 gives a general overview of the integrator’s
manual and the intended use of the DM-15/25 module. A list of related documents as well as a list of abbreviations used all through the manual
is also included. Information concerning Service and Support is also presented. The description of the DM-15/25 module is presented in
Chapter 4, including explanation on how to integrate the DM-15/25 with the customer application and the DM-15/25 technical data. Chapter 5
describes the function of the Signal and data pins. Chapter 6 describes the recommended circuitry, with reference designs.
manual and the intended use of the DM-15/25 module. A list of related documents as well as a list of abbreviations used all through the manual
is also included. Information concerning Service and Support is also presented. The description of the DM-15/25 module is presented in
Chapter 4, including explanation on how to integrate the DM-15/25 with the customer application and the DM-15/25 technical data. Chapter 5
describes the function of the Signal and data pins. Chapter 6 describes the recommended circuitry, with reference designs.
Information on the Developer Kit in described in the Developers Kit Manual
The full set of AT commands available in the DM-15/25 are described in the
AT Command Set Manual
.
1.3
Service and Support
1.3.1
Web Pages
For more information about where you can buy our modules or for recommendations of accessories and
components, look at our Web Pages.
The address is:
components, look at our Web Pages.
The address is:
http://www.sonyericsson.com/m2m/
To register for product news and announcements or for product questions, contact the Sony Ericsson modules
Technical Support group:
Technical Support group:
•
Telephone: 919-472-1122 (staffed Monday-Friday 8:00 AM – 5:00 PM EST).
•
Email:
modules.supportusa@sonyericssonmobile.com
1.3.2
Component Suppliers
Description
Part #
Additional Information
System Connector
515.569.035.030.xxx
http://www.oduusa.com
Antenna Connector and cabling
Various
http://www.amp.com
Amphenol
908-22101
1.4
Related Documents
The DM-15/25 is based upon the following mobile standards:
•
Aeris Microburst
TM
RF Module, Requirements, rev 19.0 (DM-15A, DM-25)
•
TIA/EIA/IS-91 – Mobile Station - Base Station Compatibility Standard for 800 MHz Analog Cellular
•
TIA/EIA-136-270-A Mobile Station Minimum Performance Standard, August 1999
•
FCC Part 15, 22, Radiated Emissions Limits, Public Mobiles Services
These standards define the requirements for a Cellular System mobile station using AMPS analog and TDMA technology.