ECORE TECHNOLOGY COMPANY LIMITED HT1053 Manuale Utente

  4 / 5 

Power Supply: USB 5V     

Built-in Lithium Ion batteries: 3.7V 1200mAh 

Output power: RMS 3W 

Bluetooth Profile Supported: A2DP, AVRCP 

Working range: up to 8m 

Working atmosphere: 0

℃-40℃/20%-90%RH 

Please follow the instructions below before clear the unit 

z 

Power off the unit first before clear 

z 

Use a soft, dry, lint-free cloth to wipe gently 

z 

Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discolored 

Storage   

z 

If the unit will not be used for an extended period of time, power off the unit and place the unit with accessories into the package 

z 

Do not set the unit in a damp, high temperature or the sun point-blank place   

Question: Can’t pair successfully after multiple connections

？ 

Solution

： 

（1）  Check if the blue Bluetooth indicator lights on, if the indicator goes off, please press the ON/OFF button to turn on the unit, if 

the blue Bluetooth indicator doesn’t light on yet, please charge the unit 

（2）  Perhaps there are many Bluetooth devices around the surroundings to interfere the searching, please close the Bluetooth 

function in the device you don’t need 

（3）  Power off and then power on the unit, to restart the Bluetooth function of the unit or your Bluetooth device 
（4）  Unplug the AUX cable from the unit, and re-pair the unit and the Bluetooth device 
Question: The sound occurs staccato when play

？ 

Solution

： 

（1）  Make sure the working distance is in 8-12m 
（2）  Clear away the block between the unit and the Bluetooth device to prevent the poor connecting 
（3）  Please check if the unit and the Bluetooth device is in low battery, if so, please charge the unit and your Bluetooth device 
 

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:   

(1) This device may not cause harmful interference.   

(2) This device must accept any interference received, including interference that may cause undesired operation.   

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to 

operate the equipment.   

   

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the 

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This 

equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: