Netgear 07300069 Manuale Utente
NETGEAR RangeMax Wireless-N USB 2.0 Adapter WN111 User Manual
1-3
v1.0, July 2007
WN111 Default Wireless Settings
If this is a new wireless network installation, use the factory default settings to set up the network
and verify wireless connectivity. If this is an addition to an existing wireless network, you will
need to identify the wireless network and wireless security settings that are already defined.
and verify wireless connectivity. If this is an addition to an existing wireless network, you will
need to identify the wireless network and wireless security settings that are already defined.
Your RangeMax WN111 Wireless-N USB 2.0 Adapter factory default basic settings are:
•
Network Name Service Set Identification (SSID): Any (First available network)
•
Network Mode (Infrastructure or Ad-hoc): Infrastructure
•
Data security WEP, WPA2-PSK, or WPA-PSK encryption: Disabled
Installation
To install the RangeMax WN111 Wireless-N USB 2.0 Adapter:
1. First, install the WN111 software:
Insert the Resource CD. If the Welcome screen does not open, double click Autorun.exe on the
CD.
CD.
a. Click Install the Software.The Check for Updates screen displays:
Note: In order for the RangeMax WN111 Wireless-N USB 2.0 Adapter to
communicate with a wireless access point or wireless adapter, all devices must
be set up to use the same wireless network name (SSID).
be set up to use the same wireless network name (SSID).
Figure 1-1