Netgear 07300069 Manuale Utente

2-5

2. Select a network from the drop-down list. If you select a hidden network then you must enter 

the SSID. Click Next.

3. Follow the steps of the wizard to specify the wireless security if used, and to create a profile. 

4. Review you settings, and click Finish.

The Smart Wizard initiates your wireless connection. You can use the Status Bar to verify your 
network connection. For more information, see 

The WN111 Smart Wizard uses profiles to store all the settings for a particular wireless network. 
There are two special profile names: Default and Profile. 

•

Default. The Profile named Default automatically scans for any available network. You 
cannot change this profile name. 

•

Profile. If you do not enter a name in the Profile Name box, then the name Profile is used to 
save your settings. If you do this more than once then you will be asked if you want to replace 
the previous settings stored in Profile.

You can store multiple profiles and recall the one which matches the network you want to join.

If you use your computer to connect to different wireless networks, you can create a profile for 
each wireless network. Then, you can easily load the profile that has all the settings that you need 
to join the network you are using at the time. 

There are two types of wireless network profiles that you can set up:

•

Access Point (Infrastructure). Connect to an access point or router with the 802.11 
infrastructure mode.

•

Computer-to-Computer (Ad Hoc). Connect directly to another computer with the 802.11 ad 
hoc mode.

For more information on wireless network modes, see the wireless reference document at: