Netgear 07300069 Manuale Utente

2-9

At this point the connection is established. 

1. On the Settings tab page of the Smart Wizard, select or type the Network Name (SSID).

2. Select the Computer-to-Computer (Ad Hoc) network type.

3. Click Initiate Ad Hoc. The Ad Hoc Setting dialog box opens:

4. In the Start Ad Hoc field, choose the wireless standard (802.11a, 802.11b, or 802.11g) for your 

Ad Hoc computer-to-computer network.

5. In the Channel field, Automatic should work. If you notice interference problems with another 

nearby wireless device, select a channel that is not being used by any other wireless networks 
near your wireless adapter. Use the Networks tab to view the channels in use in your area.

6. Click OK.

Note: If you cannot connect, see 

problems accessing network resources, the Windows Client and File and Print 
Sharing software might not be installed or configured properly on your computers. 
See the link to 

Note: The channel number differs depending on the country. The connection speed 

automatically defaults to the highest speed.