Netgear 07300069 Manuale Utente

2-13

3. Select the WEP encryption strength you will use. 

•

64-bit WEP data encryption 

•

128-bit WEP data encryption

4. Select Create with Passphrase and enter the passphrase. The configuration utility will 

automatically generate the WEP keys.

If the passphrase method is not available in the other devices, you must manually enter the 
keys to match exactly what is in the access point and other 802.11b wireless devices.

5. Save your settings in a Profile. 

a. Click the Save Profile button. All the configuration settings are saved in this profile. 

b. Click Apply. 

Click Close to exit the configuration utility.

Follow the steps below to configure WPA-PSK Security.

1. Run the WN111 Smart Wizard.

a. Make sure the WN111 software is installed and the WN111 is fully inserted in a USB port 

in your computer.

Note: Larger encryption keys require more processing and may slow the 

communications response times.

Note: The characters are case sensitive. Be sure to use the same passphrase for all the 

wireless devices in the network.