Netgear 07300073 Manuale Utente

1-11

In Vista, there is one more option: Enable NETGEAR Smart Wizard. 

If you clear the check mark for Enable NETGEAR Smart Wizard, the NETGEAR Smart Wizard is 
disabled, and you must set up the wireless adapter with Vista auto-configuration.

The LED on the wireless USB adapter indicates the condition of wireless link.

You can attach the wireless USB adapter directly to a USB port on your computer, or use the USB 
cable to extend the range and obtain better wireless reception. 

To use the USB cable, plastic cradle, and loop-and-hook fastener for better USB adapter placement 
on a computer monitor:

The LED color changes 
depending on the type of
network connection. Amber 
indicates 2.4 GHz, and blue
indicates 5 GHz.

Off 

• The wireless USB adapter in not plugged in to the USB port.
• The wireless USB adapter is in power save mode (default 

from power up or reset).

Slow 
blinking

• Alternating amber and blue. The wireless USB adapter is 

scanning for a network.

• Amber. The wireless USB adapter is connecting to a 

network at 2.4 GHz.

• Blue. The wireless USB adapter is connecting to a network 

at 5 GHz.

Blinking

The wireless USB adapter is connected to a wireless network, 
and is sending or receiving data.

Solid

The wireless USB adapter isconnected to a wireless network, 
but it is not sending or receiving data.