Netgear 07300073 Manuale Utente

2-9

A continuous ping will be sent to the device with the 192.168.0.1 static IP address. The 
ping response should change to Reply.

At this point the connection is established. 

1. On the Settings tab of the Smart Wizard, select or type the network name (SSID).

2. Select the Computer-to-Computer (Ad Hoc) network type.

3. Click Initiate Ad Hoc. The Ad Hoc Setting screen displays:

4. In the Start Ad Hoc drop-down list, select the wireless standard (802.11a, 802.11b, or 

802.11g) for your Ad Hoc computer-to-computer network.

5. In the Channel drop-down list, Automatic should work. If you notice interference problems 

with another nearby wireless device, select a channel that is not being used by any other 
wireless networks near your wireless adapter. Use the Networks tab to view the channels in 
use in your area.

Note: If you cannot connect, see 

. 

For problems accessing network resources, the Windows client and rile and print 
sharing software might not be installed or configured correctly on your computers. 
See the link to