Denso Wave BHT1200G Manuale Utente

 

Wireless Equipment 

In addition to industrial, scientific, and medical equipment such as microwave ovens, static 
wireless stations (permit required) used for mobile identification in places such as plant 
manufacturing lines and specified low-power wireless stations (no permit required) operate 
on the same frequency band as this device. 

1. Before using this device, ensure that no static wireless stations or specified low-power 

wireless stations for mobile identification are being used in the vicinity. 

2. In the event of instances of electromagnetic interference from this device to a static 

wireless station being used for mobile identification, either promptly alter the usage 
frequency, or halt the electromagnetic discharge 

3. If other problems arise due to reasons such as electromagnetic interference from this 

device to a specified low-power wireless station being used for mobile identification, 
please contact DENSO WAVE through QBdirect. 

 
● Requests to system designers 

・Communication may not be possible depending on the environment in which the device is 

being used. Ensure that problem-free communication is possible prior to use. 

・Use a program capable of retransmitting data if communication fails. 

・If the BHT is introduced into an environment in which a device using 2.4 GHz waveband 

electromagnetic waves is operating, or if another device using 2.4 GHz waveband 
electromagnetic waves is introduced following introduction of the system, run all devices 
and ensure that communication with the BHT is possible prior to use. 

・Check communication once again prior to use if any changes are made to the usage 

environment (addition of household appliances, movement or addition of shelves, 
equipment and so on) following introduction of the system.