Denso Wave BHT400SLBWB Manuale Utente

 

 

19 

 

 

Before the first use of the BHT, be sure to load the battery cartridge as shown below. 
The battery cartridge is not loaded in the BHT when shipped from the factory. 

(1)  Turn the BHT upside down. 

(2)  Slide the release buttons in the direction shown below and remove the battery 

cartridge cover. 

(3)  Push the battery cartridge into the BHT.  

 

(To remove it, first make sure that the BHT is turned off. Slide the release 
buttons, remove the battery cartridge cover, and pull up the battery pull strap.) 

(4)  Set the battery cartridge cover back into place and slide the release buttons to 

the original position. 

(5)  Place the BHT on the CU- 400 to charge the rechargeable battery cartridge.