IBM QLogic 10Gb CNA 42C1800 Manuale Utente
Codici prodotto
42C1800
QLogic 10Gb CNA for IBM System x and IBM Power Systems
1
®
QLogic 10Gb CNA for IBM System x and IBM Power
Systems
Systems
IBM System x at-a-glance guide
The QLogic 10Gb CNA is a PCI Express 2.0 x4 10Gb Converged Network Adapter and is available for
both IBM System x and IBM Power Systems servers. For IBM Power Systems, the adapter is known as
the 10 Gb FCoE PCIe Dual Port Adapter (Feature 5708). The adapter connects to SFP+ Multimode Fiber
SR optical modules. The System x version also supports SFP+ Active Copper cables, depending on the
Ethernet switch used.
the 10 Gb FCoE PCIe Dual Port Adapter (Feature 5708). The adapter connects to SFP+ Multimode Fiber
SR optical modules. The System x version also supports SFP+ Active Copper cables, depending on the
Ethernet switch used.
This adapter supports 10 Gbps per port maximum bidirectional throughput for high-bandwidth storage
(SAN) and networking (LAN) traffic, with full hardware offload for Fibre Channel over Ethernet (FCoE)
protocol processing. The QLogic 10Gb CNA is shown in Figure 1.
protocol processing. The QLogic 10Gb CNA is shown in Figure 1.
Figure 1. QLogic 10Gb CNA
Did You Know?
Convergence of SAN and LAN traffic on a single adapter and wire helps lower the total cost of ownership
by reducing the reduced hardware, power, cooling, management, and maintenance costs. It offers
investment protection by providing seamless compatibility with existing Fibre Channel (FC) Storage,
ethernet networks, driver software, and management applications.
investment protection by providing seamless compatibility with existing Fibre Channel (FC) Storage,
ethernet networks, driver software, and management applications.