Denso Wave WMGMR01 Manuale Utente
25
Cold-booting the BHT
If a problem persists even after warm-booting the BHT, cold-boot the BHT.
Cold-booting the BHT will erase all data stored in the RAM. It is
recommended that important data be saved into the FLASH folder or
uploaded to the host computer.
recommended that important data be saved into the FLASH folder or
uploaded to the host computer.
Cold booting procedure
Turn the BHT off. While holding down the reset button with the stylus, press the
power key and then release both buttons. Press the power key again, and the BHT
cold-boots.
power key and then release both buttons. Press the power key again, and the BHT
cold-boots.
Contents of the memory after warm-/cold-booting the BHT
After warm booting
After cold booting
Data in the FLASH folder
Retained
Retained
Data in other folders
Retained
Erased
Contents of the Registry
Retained
Erased
(Note)
Data being edited
Erased
Erased
(Note)
If the Registry has been backed up*, that backup will apply after cold booting.
* When the BHT is on, pressing the power key
with the SF key held down displays the screen
shown at right and starts backing up the
Registry.
shown at right and starts backing up the
Registry.