Denso Wave WMGMR01 Manuale Utente
35
Setting the backlight
Choosing "5:Backlight" on the Device setting menu
calls up the screen shown at left.
calls up the screen shown at left.
- Backlight function
(
*
1)
Enable or disable the backlight function. If it is
enabled, the backlight comes on when you press
any key or tap the touch screen.
enabled, the backlight comes on when you press
any key or tap the touch screen.
- Backlight On-duration
Set the ON-duration of the backlight that comes on
when you press any key or tap the touch screen.
Set the ON-duration of the backlight that comes on
when you press any key or tap the touch screen.
Battery Power: ON-duration when the BHT is not
placed on the CU.
External
Power: ON-duration when the BHT is
placed on the CU.
- Brightness Level
Select the desired brightness level from the
following four choices:
Select the desired brightness level from the
following four choices:
(Dark)
Off
Off
↑
Low Bright
｜
Mid Bright
｜
High Bright
↓
(Bright)
(
*
1)
Pressing the backlight function on/off key (the initial
setting: the simultaneous depression of the SF key
and right-hand trigger switch (M4 key)) toggles
between enabled and disabled states, regardless of the
backlight function setting made on this screen.
setting: the simultaneous depression of the SF key
and right-hand trigger switch (M4 key)) toggles
between enabled and disabled states, regardless of the
backlight function setting made on this screen.
- Power Save Mode
Change the settings for turning off the backlight
after the BHT has not been used for a specified
period of time.
Change the settings for turning off the backlight
after the BHT has not been used for a specified
period of time.
Off:
The backlight turns off immediately.
Dim:
The backlight remains on very dimly.