Denso Wave WMGMR01 Manuale Utente

 

 

39 

 

 

•

 An early upload of gathered data is recommended, since the data stored in the 

RAM might be affected by the so-called "soft error" or other environmental 
phenomena. 

•

  Do not use the BHT in the vicinity of radio equipment. The BHT may malfunction. 

•

 Avoid storing the battery cartridge in a hot place. The battery capacity may be 

decreased. 

•

  Do not touch the battery cartridge terminals or BHT's charge terminals by hand or 

stain them. Doing so could result in BHT's malfunction or cartridge charging 
failure. 

•

  When connecting or disconnecting cables, do not plug or unplug at an angle and 

do not pull them strongly. Doing so will result in a machine failure. 

•

 If the BHT has been stored in a hot (50

°

C to 60

°

C, 122

°

F to 140

°

F) and humid 

place, allow it to sit at room temperature and humidity for at least one day before 
use. Using the BHT with its inside being hot will fail to scan or result in a machine 
failure. 

•

  If the stylus wears so that its tip becomes sharpened, replace it. 

•

  In environments where static electricity can build into significant charges, do not 

operate the BHT. Doing so will result in malfunction or machine failure. 

•

 Avoid dropping the BHT or letting it undergo any shock or impact. Doing so will 

break or damage the BHT. 

•

  If the "Charge the battery!" message appears after the BHT undergoes any shock 

or impact, turn the BHT off and on and then check the battery output level. The 
battery may not have run out. 

•

  Battery cartridges should be recycled properly in conformity with local codes and 

regulations.