Xplore Technologies IX104-145 Manuale Utente

To conserve battery power when you do not want to turn off the 
computer or when you need to install a charged battery pack, put the 
computer into Suspend mode. (You can suspend operation without 
closing any programs or Windows.)

When you suspend operation:

■

Programs that are running stop (but do not close).

■

Active data is saved.

■

The system enters one of the following low-power modes:

•

Suspend-to-RAM mode – The Status LED light is 
continuously yellow. Active data is saved in RAM and most 
other components are turned off. 

Although the computer uses very little power when in 

Suspend-to-RAM mode, eventually the battery’s power does 
run out. If you will not be using the computer for an extended 
period of time, turn the computer off instead of using 
Suspend-to-RAM mode.

•

Hibernation mode – Active data is saved on the hard disk and 
power usage is reduced to the same level as when the 
computer is turned off. In Hibernation mode, there is no 
danger of losing data if battery power is lost.

For more information, see “Using power options” on page 61.